Voice morphing is possible at once, it means that if you haven't prepared an audio file yet, it is not a problem as you can easily create a new one using a voice recorder. Press the microphone button and make your speech. After recording a message, press 'Stop'. The timer you will see means the length of your track.
Audacity is a free audio pitch changer software for Windows. It is basically a very well know open source audio editor software, and is known for its audio editing capabilities. This software supports many popular audio formats like MP3, WAV, MPEG, FLAC, etc., making it easy to work with multiple audio formats. How to change audio pitch using. Text to Audio Using Binary-FSK Modulation. How To Use: Inside the console run python main.py YOUR-WORD-HERE, and your word wll be converted to an FSK modulated audio tone in.wav format. You will find you.wav file inside the 'audio' directory. You can then playback the file in any media player software. Default bitrate (can be changed).
.Accurate, professional quality precision instruments for all types of AM transmitters and Broadcast Stations.Radio Engineering Associates is pleased to offer our AMM-SD1 (Software Display)series of AM Modulation Monitors. These devices represent a breakthrough in accurate, easy to use and highly cost effective instrumentation for measuring and monitoring Amplitude Modulation transmitters and signals.
Click to view full-size imageHow it works The AMM-SD1 Modulation Monitor uses with a USB connected, microprocessor based hardware interface and RF demodulator. The RF demodulator is generally connectedto the transmitter (or transmission line).The microprocessor interface connects to the display computer using a USB cable.
The Modulation Monitor Software is installed and run on the display computer,and this software displays the percentage of modulation and modulation envelopein a series of user-selectable windows. A screen shot of the ModulationMonitor software is shown above.
Click to view larger image
A few Highlights of the AMM-SD1 Modulation Monitor
- Peak reading
The AMM-SD1 shows your actual, peak modulation percentage at all times.The monitor features a number of user-selectable, high resolution displays includingpositive and negative Analog meters, positive and negative bar-graph meters, and an oscilloscope-type display. The analog and bar-graph displaysfeature peak-hold. The peak-hold shows you the most recent, high positive and negative peak level.
- Instant Response
There is no latency. The high performance software display of the AMM-SD1 responds instantly. - Meter Displays (All displays are user selectable)
The Analog meter display emulates a classic, direct illumination, large modulationmeter system which was popular starting in the 1940s, and continuing through the1960s.The Bar-Graph meter features the unique R.E.A. positive-peaks-over-negative-peaksdisplay which, in addition to showing the modulation percentage, gives a clearvisual representation of the modulation Asymmetry (positive peaks as compared to negative peaks) of the modulated signal, in real time.
- Peak FlashersAdjustable negative and positive peak flashers warn you when the modulation is getting too high.
- Extended Measurement Range
Unlike most other commercial modulation monitors, the AMM-SD1 will accurately display positive peaks up to 160%, typical for many good-quality transmitters. - Remote Access
The AMM-SD1 allows the station engineer to view the modulation (and optionally listen to the audio)using the Internet or a LAN from a remote location. The Modulation Monitorsoftware running on the local (connected to the transmitter) computer allows other computers running the Modulation Monitor software to connect, and view(and optionally hear) the modulation in real time.Using the Modulation Monitor, it is possible for a station engineer to remotely monitor several remote sitesand/or transmitters at the same time, all from a single computer.
The AMM-SD1 is used in many applications including:
- Standard AM Broadcast Stations
- Short-Wave Broadcast Facilities (particularly multi-transmitter facilities)
- Amateur Radio Stations using AM (not usable with SSB)
- Citizen's Band Radio (CB)
- Carrier-Current (campus) Broadcasting
- Informational (travel information, traffic reporting, etc.) stations
- Radio Repair Shops and Facilities
- Educational Institutions
Features:
- Accurate, peak reading measurements of modulation.
- Separate positive and negative peak meters (100% Negative, 160% Positive) with peak-hold
- Instant display of modulation asymmetry.
- Adjustable threshold negative and positive peak flashers
- High fidelity audio output, suitable for driving external audio equipment.
- Remotely located RF pickup/detector units keep the RF at the transmitter or antenna feedline, where it belongs!
- Need to build your own RF pickup/detector unit? RF pickup/detector units are very easy to construct, allowing pickup units to be built into transmitters, if required
- 2.5% accuracy!
- Covers the entire MW and HF range from 500kHz to 30mHz
- Coverage can be extended to virtually any frequency or power level by using a custom detector. You may build your own detector, or we can supply a custom unit. Contact us with your needs.
- High Impedance RF input - uses a negligible amount of RF power, allowing the monitor to be used with low power transmitters without signal loss
- Built in the United States of America!
Simple to Install and Connect to a Wide Variety of Equipment
Connecting the AMM-SD1 to your transmitter is simple. The monitor includesone standard RF pickup unit. The Pickup Unit is a high impedance device, and consumes very little power (milliwatts in most cases).Note: A standard RF pickup is included with the Modulation Monitor.
- Connecting to a Broadcast Transmitter Most AM Broadcast Transmitters include an RF output for connection to a modulation monitor. Simply connect the RF pickup unit to this output.
- Connecting directly, in line, with the transmitter output This type of connection is typical for non-broadcast equipment such as short wave, amateur, and other similar equipment. The RF pickup unit is connected directly to the transmission line with a T connector. (See picture). Various power level RF pickup units are available.
- Other connection methods Contact us ! We can advise you of the best connection for your purpose.
Shown to the left is a typical in-line connection. In this example, the rf pickup unit is connected to the antenna feedline usinga T connector.
You may also build your own RF pickup unit (plans and specifications are included)allowing the AMM-SD1 to be used in a wide variety of environments, and withvirtually any AM transmitter of any power level. Radio Engineering Associates willalso build custom RF pickup units for you. Contact us with your requirements.
For Off-Air Monitoring, the AMM-SD1 features a wide range, high impedance audio output. This output is suitable fordriving an audio monitoring amplifier, headphone amplifier or other similaraudio system. Note: This output is not designed to drive headphones directly.
Computer Hardware and Software Requirements
Software Requirements:- Microsoft Windows XP (SP3 or better), Windows 7 (SP1 or better), Windows 8 or Windows 10 (should work with all versions of Windows - NT and later)
- High speed Internet connection only used for downloading the installation software (not required after the software has been downloaded, except for updates). Note: A network connection of at least 768kbps is required for remote operation.
- Intel Pentium 4, 1.2gHz or better
- 500mb or more RAM recommended
- Good quality VGA or better video adapter
- 1 free USB 'A' socket
Pricing and Availability: In Stock
Price: $219.95 (US Dollars)Price Includes:
- Model AMM-SD1 Monitor with a USB interface, and the Modulation Monitor Software License (software download from our software distribution server. CD Media is also available). The Software can be installed on multiple computers for remote operation.
- 1 RF pickup unit with SO-239 connector. Note: Specify desired power level for the RF Pickup Unit when ordering. The following standard power level RF pickup units are available. Contact us if you need another power level:
- Direct Connect to a standard AM Broadcast Transmitter modulation monitor RF output (12V Max.).
- 200 - 1000 Watts (carrier)
- 50 - 500 Watts (carrier)
- 30 - 300 Watts (carrier)
- 10 - 100 Watts (carrier)
- 3 - 30 Watts (carrier)
- 1 - 10 Watts (carrier)
- Other (contact us!)
- Interconnecting cable to connect RF pickup unit to monitor (1/8 inch shielded dual cable).
- User Manual
Options and Add-Ons
Audio Modulation Software Programs
- Additional standard RF Pickup Units - $45.00
- Tee Adapter for connecting RF Pickups - $6.00 - 2 SO239 Female, one PL259 male
- Physical media containing the software. Note: Normally the software is downloaded from the R.E.A. software download page. This ensures you have the latest version of the software.
- The AMM-SD1 Modulation Monitors are in stock! Click here to purchase.
- Contact us by Telephone: Our Number is 978-597-0010, 9:00AM to 5:00PM Eastern Standard Time
- By Email to orders@radioassociates.com
- Paper mail: (see our mailing address, below).
Satisfaction Guarantee!!
If you are not completely satisfied with your purchase, you may return it within15 days of receipt (in new condition in original packing) for afull refund. Shipping costs are not refundable.
Contact Us:
- General Information: info@radioassociates.com
- Technical Support and Questions: support@radioassociates.com
- Orders: orders@radioassociates.com
- Or just call: 978-597-0010
79 Tyler Road
Townsend, MA 01469
Phone: 978-597-0010
Audio Modulation Software For Beginners
.
